Home Messages Index
[Date Prev][Date Next][Thread Prev][Thread Next]
Author IndexDate IndexThread Index

Re: Tungsten T5 problem

  • Subject: Re: Tungsten T5 problem
  • From: Roy Schestowitz <newsgroups@schestowitz.com>
  • Date: Wed, 01 Jun 2005 15:02:51 +0100
  • Newsgroups: comp.sys.palmtops.pilot
  • References: <slrnd9qmbf.8th.svan@carbon.redbrick.dcu.ie>
  • User-agent: KNode/0.7.2
Sarunas Vancevicius wrote:

> All,
> My boss got one recently, and there is a slight problem.
> If you go in to the contacts, select one of them, then press down
> key, it does not show the next one, rather it keeps on showing the
> contact that you have open and scrolls down the the contact list in the
> background.

This sounds fine so far. I think it's the behaviour that I used to see on my
M130 (Palm OS 4.0, I suspect) and it's definitely the behaviour in Palm OS

> The way his old Palm m505 used to work, was select contact, press down
> key, and the next contact is shown.

What if you have many telephone numbers down the list? Out goes the stylus
just to tap that little arrow on the right? Usability is better this way;
in most cases, I think.

> Not sure is this an annoying feature or a bug. Tungsten is running the
> latest update, and I did a hard reset and no luck. So is it a defective
> tungsten or is it a bug/feature, or is it the way its supposed to work?
> And is there any way to make it work the way his m505 worked?

Probably a change of habit or change of software would do.

> Googled and searched palms website but could not find anything.
> Thanks,

Hope it helps,


Roy S. Schestowitz

[Date Prev][Date Next][Thread Prev][Thread Next]
Author IndexDate IndexThread Index